Direct Drive cleaner heaD instructions
looking for blockages
•
Ensure the appliance is disconnected from the charger before looking for
blockages. Be careful not to pull the 'ON' trigger.
•
Do not operate while checking for blockages. Failure to do so could result in
personal injury.
•
Beware of sharp objects when checking for blockages.
•
To gain access to blockages in the floor tool, remove the base plate by using a
coin to loosen the screw marked with a padlock.
•
If you cannot clear an obstruction you may need to remove the brush bar. Use
a coin to unlock the fastener marked with a padlock. Remove the obstruction.
Replace the brush bar and secure it by tightening the fastener. Ensure it is fixed
firmly before operating the appliance.
•
This product has carbon fibre brushes. Take care if coming into contact with
them, as they may cause minor skin irritation. Wash your hands after handling
the brushes.
•
Refit all parts securely before using.
•
Clearing blockages is not covered by your Dyson guarantee.
Looking for blockages
Clearing brush bar obstructions
1
10
2
3