Lcd Value | Memory Dump - ADJ STAGE SETTER 8 User Manual

L C D V A L U E
The LCD display can be configured to read in DMX channel values (1-255) or to read in dimmer per-
centage value (1-100). To change the LCD value, follow the steps below:
1. Turn off power to the device.
2. Hold down Bump Buttons 1-4, then turn main power on while continuing to hold down these but-
tons. Once main power is on the current MIDI Receive channel will be displayed in the LCD.
3. Tap Bump Button 7 to toggle the display value between 255 (DMX channel values) and 100 (dim-
mer percentage value).
4. Tap the Blackout Button to exit the adjustment mode.
M E M O R Y D U M P
This function allows the user to reset to unit to its factory default settings. Please note that this will
erase all user-created programs. To reset the unit, follow the steps below:
1. Turn off power to the device.
2. Hold down Bump Buttons 2, 3, 6, and 7, then turn the power back on while continuing to hold
down these buttons. The unit should now be reset to default settings.
18