Live Edit Editor - Value - ADJ Wolfmix WMX1 Reference Manual

L I V E E D I T E D I T O R - F I X T U R E S ( C O N ' T )
Displayed data:
• The name of the live edit to the top left.
• A grid of up to 16 fixture buttons, displaying fixture name and a white dot to indicate the fixture has an
edit applied.
• A button to the top right to edit the values of the selected fixtures.
• Three buttons to rename the live edit, set the live edit to Flash mode, and Lock the live edit which
preserves the state when changing presets (useful for Parking channels).
• The currently visible Group and Page to the bottom right.
Encoder actions:
• ● Pushing the first encoder will reset the selected fixtures, removing all live edit values from the
fixtures. Moving the encoder determines whether to reset the selected fixtures or all fixtures. Upon
resetting the fixtures, the white dots will disappear.
• ● Moving the third encoder filters the displayed fixtures in the grid by group. Pushing the encoder
selects or deselects all fixtures within the group.
• ● If there are more than 16 fixtures within the current group. Moving the fourth encoder navigates
through between the pages of fixtures.
Other actions:
• Tapping the buttons in the grid selects and deselects the fixtures. When a fixture is selected, the
corresponding channels will be shown on the Value screen. If 2 or more fixtures of the same Fixture
Type are selected, their channels will be merged and controlled together on the Value screen.
• Tapping the rename button will show the keyboard screen allowing for the name of the live edit to be
changed.
• Tapping the Flash button will enable or disable the live edit's Flash property. When the Flash property
is set, the Matrix button will turn white and the edit will be enabled on pressed and disabled on release.
• When editing a Live Edit, tapping the flashing Matrix button stores the new Live Edit and closes the
editor. Tapping any other button cancels the change.
LIVE EDIT EDITOR - VALUES
Displayed data:
• A grid of 16 channel buttons, each displaying the channel name and the current live edit value if one
has been set.
• The value of the selected channels is displayed to the bottom left.
Encoder actions:
• Moving the first encoder changes the selected channel value. Tapping the encoder will show a grid of
all Features related to the selected channel.
• Pushing the second encoder will reset the selected channel, removing the live edit value from the
channel.
Other actions:
• Tapping a button in the grid selects a channel.
• Tapping the REC DMX button to the top right records the current DMX output frame and applies it to
the selected fixtures.
28