Cisco 3600 Series Upgrade Instructions page 21

Upgrading system memory

Hide thumbs Also See for 3600 Series:

Table of Contents

Figure 9

Removing SDRAM SODIMMs

To remove SDRAM SODIMMs, follow these steps:

Attach an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the

Step 1

equipment end of the wrist strap to the metal back plate of the chassis, avoiding contact with the

connectors.

Step 2

On the mainboard, locate the SDRAM SODIMM socket. (See

Handle the SODIMM by the edges only; do not touch the memory modules, pins, or traces (metal fingers

Caution

along the connector edge). Handle carefully. SODIMMs are ESD-sensitive components and can be

damaged by mishandling.

Release the plastic clips from the top SODIMM, which releases the SODIMM from its socket. (See

Step 3

Figure

OL-5423-02

SDRAMM SODIMM Location in the Cisco 3745 Router

10.)

Upgrading System Memory in Cisco 3745 Routers

SODIMM

Plug-in mainboard

Figure

9.)

Upgrading System Memory in Cisco 3700 Series Routers

Table of Contents