Cisco 3600 Series Upgrade Instructions page 14

Upgrading system memory

Hide thumbs Also See for 3600 Series:

Table of Contents

Upgrading System Memory in Cisco 3725 Routers

Handle the DIMM by the nonconnector edges only; do not press on the center. Handle carefully. DIMMs

Caution

are ESD-sensitive components and can be damaged by mishandling.

Remove the DIMM by pushing the locking spring clips on both sides outward. This ejects the DIMM

Step 3

from its socket. (See

Figure 4

Step 4

Hold the DIMM by the edges with your thumb and index finger and lift it out of the socket. Place it in

an antistatic bag to protect it from ESD damage.

Step 5

If necessary, repeat

Step 6

Proceed to the

Upgrading System Memory in Cisco 3700 Series Routers

Figure

4.)

Removing and Installing SDRAM DIMMs in the Cisco 3725 Router

Step 3

and

Step 4

for the other DIMM.

"Installing SDRAM DIMMs" section on page

Locking spring clips

15.

OL-5423-02

Table of Contents