Shelving; Interior Light; Normal Operating Sounds - Haier HVD024E User Manual

English
• There will be a 3 degree variance +/- between the temperature you
select and the temperature indicated on the LED readout.
This occurs because the wine cooler activates and deactivates
trying to maintain your desired temperature. There is often a
10˚ variance between the top and bottom shelves of the wine cooler.
Therefore, if you have set the wine cooler for 50˚ and have a
mix of red and white wines, you may want to put the white wine
on the bottom shelf where the temperature will be 45˚ F, and place the
red wine on the top shelf where the temperature will be 55˚ F.

Shelving

• The shelves are designed for appearance and easy cleaning. To
accommodate different sized bottles the shelves slide out and can be
moved up or down into any of the tracks molded into the cooler
cabinet. Larger bottles or Magnums can be more easily accommodated
at the cross shelves at the bottom of the cooler. You will notice that the
shelves are designed so the bottles do not line-up directly over one
another. This allows free air movement and provides more space.

Interior Light

• To complement the look of your wine collection, a soft light has been
built into the wine cooler. Simply push the "On/Off" button and the
light comes on, push again for off. For maximum energy efficiency,
leave light off when not viewing your collection.
• When door is open the light will go on. Upon closing the door,
the light will go off in approximately 15 seconds.
Normal Operating Sounds You May Hear
• Boiling water, gurgling sounds or slight vibrations that are the result of
the refrigerant circulating through the cooling coils.
• The thermostat control will click when it cycles on and off.
(Type and number of shelves will vary per model)
(see fig. #1)
English
English
8
8