Safety Precautions - Haier XQB50-18 User Manual

Safety precautions

Please plug the plug on special 220V AC receptacle.
Be sure to use three phase power receptacle.Ensure
the earthing prong of the power redeptacle is earth-
ed reliably.Use leakage protector if possible.
Do not bend, stretch, twist, bind the power cord by force, or press or clamp it with heavy items.
Keep the prong of the power plug clean. If dust is found on the power plug,
please wipe it off with dry cloth.
If the power cord and power plug are bad, or the receptacle is loose, be
sure to have it replaced by the technicians of our special shop or our
customer care agent.
In case the washing machine is installed on ground
with carpet, be careful not to block the ventilation
hole with carpet.
Do not put the machine at damp place like the
bathroom. Never wash it with water. Do not
put wet laundries on the control panel coating
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose, do not use
the plug any more.
In normal usage of the washing machine, the power
plug shall be ready to be pulled or plugged with hand.
Be sure to pull the plug off and close the water faucet
when occurring power failure,delivering the maching,
setting the machine idle or cleaning the machine. Do
not plug or pull the power plug with wet hand.
earth
Do not use water with temperature higher than 50
The ventilation
holes at thebottom
1.Do not wash water-proof laundry like the raincoat,
bikecovers, down textiles etc. To avoid abnormal
vibrations in spinning and damages to the laundries.
.
2.As wahing the laudries floating on the surface it`s
careful specially to avoid the laundries damaged.
Before Using
Before Using