Motion Sensor Kit - Mitsubishi Heavy Industries FDU45KXE6F-W Technical Manual

12.2 Motion sensor kit (LB-KIT2)
12.2 Motion sensor kit (LB-KIT2)
(1) Specification
(1) Specification
External dimensions
Detectable area
Ceiling plane
Detectable area φA
Detectable area φB
High of the ceiling h[m]
Detectable area φA[m]
Detectable area φB[m]
37
Notes
Floor face
2.7 3.5 4.0
4.5 6.4 7.6
6.4 8.3 9.5
17
Case of wiring out to the side face,
cut thin wall part
74
37
20 5
Case of wiring out
to the back
φ15 (Ciling hole)
Wiring pass hole
Switch box
Lockscrew of cover
(1) The recommended height, is lower than 4m for motion sensor.
When the installation height is higher, motion detection accuracy
might be reduced.
(2) Connenction wiring （ prepare on site） for signal wiring is
× 3 cores wire or more （ Red,White,Black） and maximum
0.2mm 2
total extension 8m.
(3) Motion sensor kit can be installed on the wall, but recommend
installing is the ceiling plane.
(4) In the case of wall installation, the detectable area is 5m in front
and about 100° left and right.
(5) Refer to the installation sheet for details.
178
- -
'21 • KX-T-386
PJZ000Z341
PJZ000Z341
Unit:mm