Color Changing Instructions - Feit Electric TR2X4G2/6WY/WH Important Safety Instructions And Installation Manual

Color Changing Instructions

Fixture is dimmable from 10%-100%
using 0-10v dimming.
PICK YOUR FAVORITE LIGHT COLOR
BEFORE INSTALLING
• You can lock in one color temperature or change among
multiple color temperatures, it will memorize the last
color temperature and reset automatically.
• When the Slide switch is set to (3000K),
the color temperature is set at Soft White.
•When the slide switch is set to (3500K),
the color temperature is set to Neutral White.
•When the slide switch is set to (4000K),
the color temperature is set at Bright White.
•When the slide switch is set to (5000K),
the color temperature is set at Daylight.
•When the slide switch is set to (6500K)
the color temperature is set at Daylight Deluxe.
Fixture Maintenance
1. Please make sure the power is off before maintenance by turning the breaker off or removing the fuse from the fuse box.
2. To avoid any damage to the product, please do not use any chemical solvents during the routine maintenance.
3. Do not use liquid cleaner on the LEDs, LED driver or wiring inside the light fixture.
4. To ensure better lighting, please clean the lamp periodically with a soft cloth.
SELECTABLE COLOR TEMPERATURE
SOFT WHITE NEUTRAL WHITE
BRIGHT WHITE
3000K 3500K
DAYLIGHT DAYLIGHT DELUXE
4000K 5000K 6500K
ADJUST YOUR LIGHT COLOR ANYTIME
WITH A REGULAR WALL LIGHT SWITCH
• Set the slide switch on the middle of the fixture to SWITCH
• Toggle your light switch ON and OFF within 0.5 - 3 seconds
to cycle through the five different color temperatures.
• If the fixture is left ON for over 10 seconds then
turned OFF, the fixture will remember the last
color temperature selected and will display that
color when turned on again.
• The reset function is used when using multiple color
selectable lighting products operating from the same light
switch. In the event that multiple fixtures are not displaying
the same color at the same time, the fixture must be RESET
using your existing light switch. Simply toggle the wall
switch ON and OFF 7 times, leaving it in the ON position
for 1 second intervals. ( Ex. with the fixture in the ON
position, toggle the wall switch OFF then ON, leaving it ON
for 1 second, then OFF then ON, leaving it ON for 1 second.
(Repeat 7 times)
5
(SWITCH)
WWW.FEIT.COM
RETAIN THIS MANUAL FOR FUTURE USE