Table Of Contents; Safety Information; Fcc Statement; Warranty - Feit Electric TR2X4G2/6WY/WH Important Safety Instructions And Installation Manual

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Color Changing Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Important Safety Information
READ BEFORE INSTALLATION
WARNING: RISK OF SHOCK House electric current can cause
1.
painful shock or serious injury unless handled properly. For your
safety, always remember to:
A. Turn off the power Supply at the fuse or circuit breaker box before
you install the fixture.
B. Ground the fixture to avoid potential electric shocks and to ensure
reliable starting.
C. Double-check all connections to be sure they are tight and correct.
D. Wear rubber soled shoes and work on a sturdy ladder.
CAUTION:
Turn off the main power at the circuit breaker
before installing the fixture in order to prevent possible shock.
CAUTION:
Universal Voltage Input: Suitable for use with
60Hz circuits, 120 volt to 277 volt. Suitable for damp locations.
Reliable operating temperature is 0°F - 100°F. The fixture has
0-10v dimming.
Unique Identifier: TR2X4G2/6WY/WH
Responsible Party - U.S Contact Information
FEIT ELECTRIC Co.
4901 GREGG RD. PICO RIVERA, CA, USA 90660-2108
TEL: (562)463-2852, www.feit.com

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving
antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
CAN ICES-005 (B).
Limited Warranty
This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If the product fails within the warranty period,
please contact Feit Electric at info@feit.com, visit feit.com/contact-us or call 1-866 326-BULB (2852) for instructions on replacement or refund. REPLACEMENT OR REFUND
IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of
incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state or province to province.
This fixture is designed for use in a circuit protected by a fuse or circuit
2.
breaker. It is also designed to be installed in accordance with local
electrical codes. If you are unsure about your wiring, consult a qualified
electrician or local electrical inspector, and check your local electrical code.
3. WARNING: RISK OF CUTS Some metal parts in the fixture may have sharp
edges. To prevent cuts and scrapes, wear gloves when handling the parts.
4. Account for small parts and destroy packing material, as these may be
hazardous to children.
SAVE THESE INSTRUCTIONS
NOTICE:
• All electrical connections must be in accordance with local and
National Electrical Code (N.E.C) standards. In you are unfamiliar with
proper electrical wiring connections, obtain the services of a qualified
electrician.
• Remove the Fixture and the mounting package from the box to make
sure that no parts are missing by referencing the illustrations on the
installation instructions.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
2 WWW.FEIT.COM
RETAIN THIS MANUAL FOR FUTURE USE