Introduction Of The Major Functions; Using Process - Haier HWM75-111S User Manual

Introduction of the major function
The machine has good comprehensive performance, and nice appearance.
It adopts streamline appearance and full plastic shell, which will never get rust.
For the design on safety and reliability, it adopts the wash shelf, spin shelf and water
inlet groove design, and reduces the unfavorable influence on the electrical component
by the vapor. Therefore it guarantees more safe and reliable washing.
It adopts complete enclosed base frame and low-noise motor, and thus reduces the
working noise significantly. We can guarantee that the purchase of this machine will bring
you a clean world without disturbing your quiet life.
Filling water from wash water-filling entrance
Use the new water inlet hose provided with the
machine to connect to the water faucet.Old hose
sets should not be reused.
Insert the water inlet hose into the water-filling
entrance, then push the water-filling jointer into
the entrance on the control panel. (To dismantle
the water inlet pipe, just push the control handle
as indicated in the figure and pull it out)
Foam-removing spinning during high-efficiency rinsing
Use the foam-removing spinning to
remove the extra detergent liquid. It
can both shorten the washing time
and save the water consumption.
Spin
Fill water for
about 1 minutes
Remove most of
the foam extra
detergent liquid.
Foam-removing
spinning
Spin for about
1~2 minutes
Remove the detergent
liquid remained
The effect is best when the
laundries quantity is below
80% of the rated value.

Using process

Using process
Water inlet hose
Push
Wash water inlet
Control handle
Water inlet hose
When foam-removing spinning during
high-efficiency rinsing, please fill water
from the spin water-filling entrance.
Water-filling
entrance
Spin water-filling
entrance