Table of Contents
Advertisement
Drainage into a wash basin
:
Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot
detergent solution (e.g. when draining
hot detergent solution into a
washbasin).
Do not reach into the hot detergent
solution.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the washing machine/
fabrics.
Make sure that:
The plug does not block drainage
■
from the washbasin.
The water drains away quickly
■
enough.
The end of the drain hose is not
■
immersed in the drained water.
Installing the drainage hose:
Drainage into a siphon
The connection point must be secured
using a hose clamp with a diameter of
24-40 mm (available from specialist
dealers).
Positioning and connecting
Connection
Drainage into a plastic pipe
with rubber sleeve or into
a gully
Connection
Levelling
Loosen lock nut in a clockwise
1.
direction with a wrench.
Check the levelling of the washing
2.
machine with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must
Note:
stand firmly on the ground.
The washing machine must not
wobble!
Tighten the lock nut against the
3.
housing.
In doing so, hold the foot tight and
do not adjust its height.
en
35
Advertisement
Table of Contents
