Table of Contents
Advertisement
Depending on the model
# Aquastop
+ Standard
( Mains cable
0 Water
drainage
Also required for connection of the
water drainage hose to a siphon:
1 hose clip Ø 24–40 mm (DIY store) is
also required for connection
to a siphon. Connecting the water
~ Page 33
Useful tools:
Spirit level for alignment ~ Page 35
■
Spanner with:
■
– size 13: for loosening the
transportation protection devices
~ Page 32
– size 17: for aligning the appliance
feet ~ Page 35
8 Water inlet
@ Installation and
operating instructions
H Elbow for fixing the
waste water hose
P Covers
Positioning and connecting
Installation
Moisture in the drum is due to
Note:
the final inspection.
Secure installation
:
Warning
Risk of injury!
The washing machine is heavy –
■
caution: take care when lifting it.
If the washing machine is lifted by
■
protruding components (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
If the hose and mains cables are not
■
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may crack/burst.
■
Do not install the washing machine
in areas exposed to frost and/or
outdoors.
If the washing machine is raised by
■
protruding components (e.g.
washing machine door), the
components may break off and the
washing machine may be damaged.
Do not lift the washing machine by
protruding parts.
If in doubt, have the appliance
Note:
connected by a technician.
Installation surface
The washing machine must be
Note:
stable so that it does not move around.
The surface on which it is installed
■
must be firm and level.
Soft floors/floor coverings are not
■
suitable.
en
31
Advertisement
Table of Contents
