Table of Contents
Advertisement
Positioning and connecting
en
Installation on a base or a
wooden joist floor
:
Warning
Damage to the appliance!
The washing machine may "wander"
and tip/topple from the base when
spinning.
Always secure the washing machine
feet with fixing brackets.
Fixing brackets: order no. WX 975600
If installing on a wooden joist
Note:
ceiling:
If possible, install the washing
■
machine in a corner.
Screw a water-resistant wooden
■
panel (min. 30 mm thick) to the floor.
Installing the appliance in a
kitchenette
:
Warning
Danger of death!
Danger of death if live parts are
touched.
Do not remove the appliance cover
panel.
Notes
Recess width of 60 cm required.
■
Only install the washing machine
■
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
32
Removing the transport locks
Caution!
Damage to the appliance
The washing machine is secured for
■
transportation using transport locks.
If the transport locks are not
removed, the drum, for example,
may become damaged when the
washing machine is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
To prevent transport damage from
■
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Store the screw and sleeve screwed
together.
Take the hoses out of the holders.
1.
Take hoses out of the elbow and
2.
remove elbow.
Unscrew and remove all four
3.
transport brace screws.
Advertisement
Table of Contents
