Table of Contents
Advertisement
Segment connection
Flange connection
CAUTION
1) If present
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Dismantling and fitting nozzle ring at
turbine end
Remove screws (61044) and segments (51012).
Undo and remove screws (61044).
Pull gas inlet casing (51001) complete with nozzle ring (56001) away
from gas outlet casing (61001).
Use suitable underlays when putting down gas inlet casing.
Remove gasket (61050).
Operation Manual / TPL76-C
8
8.8
Page 118
Advertisement
Table of Contents
