Table of Contents
Advertisement
CAUTION
CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Dismantling and installing the turbine
diffuser and nozzle ring
Fitting nozzle ring
Fastening the nozzle ring
When fitting the nozzle ring, new screws (56019) and locking plates
(56018) from the customer spare part set (97070) must be used.
Push in nozzle ring (56001) as far as it will go up to cover of gas inlet
casing.
Coat thread of screws (56019) with high-temperature grease and fit
with locking plates (56018).
Tighten screws (56019) and bend locking plates (56018) over.
Correct assembly
The nozzle ring must be easy to move after assembly.
Operation Manual / TPL76-C
8
8.6
Page 106
Advertisement
Table of Contents
