ABB HT566195 Operation Manual page 113

© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Installing cartridge group
Fitting diffuser and wall insert
Screw swivel lifting eyes (90235) into holes in wall insert (77000).

Align mark (A) with notch (B).

Fit centering screws (90230) in such a way that spigots on centering

screws protrude maximum 5 mm.
Lower wall insert and align centering screws (90230) with threaded

holes.
Remove swivel lifting eyes (90235) and centering screws (90230).

Put the diffuser (79000) in place using the swivel lifting eyes (90235).

Remove the swivel lifting eyes (90235).

Fit screws (76002).

Operation Manual / TPL76-C
8
8.7 Page 111