Cisco 2500 Series Installing Manual page 4
Installing cisco ac and dc power supplies in cisco 2500 series routers
Hide thumbs
Also See for 2500 Series:
- User manual (92 pages) ,
- Installation and configuration manual (81 pages) ,
- Deployment manual (23 pages)
Advertisement
Removing AC and DC Power Supplies
Figure 2
Screw
Step 2
Caution
Figure 3
Step 3
4 Installing Cisco AC and DC Power Supplies in Cisco 2500 Series Routers
Removing the Screw
0
Disconnect the power connector from the system board. (See Figure 3.) Grasp the sides
of the power connector and pull upward while rocking the connector side to side.
Do not pull on the connector wires.
Disconnecting the Power Connector
Fan
Power connector
Fan connector
Push the loosened power supply backward and lift it out of the chassis. (See Figure 4.)
AC power supply
Advertisement
