Yamaha WR250R 2020 Owner's Manual page 23

1 2
3
1. Stopwatch indicator " "
2. Tripmeter A indicator " "/
Distance-compensation tripmeter "
3. Tripmeter B indicator " "
TIP

The multi-function display can be
set to the basic mode or the mea-
surement mode.

Tripmeter A will automatically re-
set to zero when changing from
the basic mode to the measure-
ment mode or vice versa.
Basic mode:

a speedometer

an odometer

two tripmeters

a fuel reserve tripmeter

a clock

a self-diagnosis device
Measurement mode:

a speedometer

a distance-compensation tripme-
ter

a stopwatch

a self-diagnosis device
TIP

Be sure to turn the key to "ON" be-
fore using the "SELECT 1", "SE-
"
LECT 2" and "RESET" buttons.

When the key is turned to "ON", all
of the display segments of the
multi-function display will appear
and then disappear, in order to test
the electrical circuit.

To switch the speedometer and
odometer/tripmeter displays be-
tween kilometers and miles, press
the "SELECT 2" button until the
distance units change.
Speedometer
The speedometer shows the vehicle's
traveling speed.
4-4
Instrument and control functions
Basic mode
Odometer and tripmeter modes
The odometer shows the total distance
traveled by the vehicle.
The tripmeters (A and B) show the dis-
tance traveled since they last reset and
the fuel reserve tripmeter "F" shows the
distance traveled since the fuel level
warning light came on.
TIP

The odometer will lock at 99999.

The tripmeters will reset and con-
tinue counting after 999.9 is
reached.
During normal operation, push the "SE-
LECT 2" button to switch the display
between the odometer mode and the
tripmeter modes A and B in the follow-
ing order:
odometer  tripmeter A  tripmeter B
 odometer
1
2
3
4
5
6
7
8
9
10
11
12