How To Use Spray Tips - BE Power Equipment HW2765HG Operator's Manual

SET-UP
0
o
RED

HOW TO USE SPRAY TIPS

The quick–connect on the nozzle extension allows you to switch between five different quick-connect spray
tips. Spray tips can be changed while the pressure washer is running once the spray gun trigger safety lock
is engaged. The spray tips vary the spray pattern as shown above.
FOLLOW THESE INSTRUCTIONS TO CHANGE SPRAY TIPS:
1. Pull back collar on quick–connect coupler and pull the current spray tip off. Store the spray tips in the
holder provided on the handle. Storing nozzles in the designated holder will help prevent any debris from
clogging the tip.
2. Select the desired spray tip:
• For a gentle rinse, select the white 40° spray tip.
• For light cleaning, select the green 25° spray tip.
• For high pressure cleaning, select the yellow 15° spray tip.
• To scour the surface, select the red 0° spray tip.
• To apply detergent, select the black spray tip. No other spray tip will draw soap
3. Pull back on collar, insert spray tip and release collar. Tug on spray tip to ensure it is securely in place.
USAGE TIPS
• For most effective cleaning, keep spray tip 8 to 24 inches away from cleaning surface.
• If the spray tip gets too close to the surface being cleaned, especially using a high pressure spray tip (red
or yellow), it may be damaged. Do not use the red spray tip on glass. Doing so could result in broken
or cracked glass.
BEPOWEREQUIPMENT.COM
15
o
YELLOW
25
o
GREEN
40
o
WHITE
Soaper
BLACK
9