Table of Contents
Advertisement
Washing Methods
4. Setting washing temperature and spinning speed
Please set the temperature knob at the
wise, select an appropriate temperature as required;If spin is not needed, set
the speed button at "0"; otherwise, select an appropriate speed. Refer to the "Guide
to Program Selection" section for maximum washing temperature and maximum
spinning speed.
5. Selecting other functions
Select other functions if necessary (refer to the "Operational Functions" and
"Guide to Program Selection" section).
6. Washing
Press the Start / Pause button, the washing machine will operate according
to the pre-set programs.
7. Finish
The washing machine will stop operation automatically when a washing cycle
ends. The
sign will appear on the display screen. Now turn the program knob
at "0", open the door and take out the laundry. Then turn off the tap and unplug
the power cable.
Hints for saving energy During operation:
1. Collect clothes for one full wash load.
2. Do not overload the washing machine.
3. Select a right washing load.
4. Pre-wash heavily soiled clothes.
5. Reduce the amount of detergent or choose super quick wash or
delicate wash programs for slightly soiled clothes.
6. Choose a proper washing temperature. Only exceed 60 for hea-
vily soiled clothes.
7. Do not use more detergent than required.
8. Softening agent makes clothes softer and easier to iron.
9. Add fabric conditioner will not only make the clothes soft but
also get rid of static condensation to facilitate ironing.
13
position;if heating is not needed; other-
Control Panel Operating Functions
F Soak button
Press this button, the corresponding icon will go on. After the softening cycle is reached, the washing
machine will not drain before the final spin-drying cycle, but a soaking cycle will be started. Now the
"Soak" icon on the display will blink, and the inner drum will rotate once every 2 minutes (at both dir-
ections). If you want to spin the laundry, press this button again or press the Start/Pause button, the
corresponding icon will go off and operation will continue until the program ends. Selection of this fun-
ction can reduce the creases of the laundry.
G Extra rinse button
Press this button, the corresponding icon will go on. Before the softening cycle is reached, an additional
rinse operation will be activated. Now the extra rinse icon on the display will blink. At the end of the
extra rinse cycle, the icon will go off, and the program will continue to the end.
H Prewash button
Before washing heavy soiled laundry, press this button, the pre-wash icon will go on, and the washing
machine will go through a pre-wash cycle first. Now the prewash icon blinks and compartment 1 of the de-
tergent drawer is filled with water. After the prewash cycle, the prewash icon will go off and other pro-
grams will follow.
I Delay button
Before running a program, press this button and setting the length of delay time by pressing the speed
button or the temperature button within 3 seconds. The range is 0-24 hours. Each press of the speed bu-
tton will increase 30 minutes, and each press of the temperature button will decrease 30 minutes. After
this button is set, the delay icon will go on until the delay program ends. The delay time will cover
the program time. So it should be longer than the program time; otherwise, the set delay time will be
ignored and washing operation will be started.
J Display
The remaining washing time, temperature, speed, other functions and error messages will be displayed.
See the Display Messages for details.
K Detergent distribution drawer
Instructions are printed on the handle of the drawer. Open the drawer, three compartments
can be seen:
Compartment 1: Pre-wash detergent. Do not add detergent into this compartment if pre-wash is not
required.
Compartment 2: For P1-8 washing cycles, add detergent into this compartment whether pre-wash is
selected or not.
Compartment 3: Softener, conditioning agent, perfume, etc.
D+I button combination------Safe button
After a program is started, press the Delay button and the Start/Pause button simultaneously for 3 se-
conds to lock the keyboard. Now"
" will appear on the screen. Press the button combination again
for 3 seconds to unlock the keyboard. Now "
free the washing machine from external disturbances during operation, such as misoperation by children.
Note: If the keyboard is locked during operation, please cancel this function after the program ends.
Attention: If the keyboard lock function is not activated, the current program can be cancelled by
turning the programming knob at "0" during operation; new programs can be set by turning the progra-
mming knob again.
2
3
1
" will be displayed. This function is intended to
7
Advertisement
Table of Contents
