Washing Procedure - Hyundai HK1207TVE Operation Manual

Washing Procedure

1. Loading
Open the door, put in the laundry piece by piece.
Close the door tightly.
Notes: 1) When first using the washing
machine,let it run unloaded for one program
to prevent the laundry from being tainted by
oil or dirty water from the washing machine.
2) Do not overload the washing
machine.
2. Adding detergent
Slide out the detergent drawer and put the required detergent and
softening agent into the corresponding boxes. Push back the drawer gently.
Caution:
1) For pre-washing program, detergent should be added to both
compartments 1 and 2. Compartment 2 allows only solid detergents.
For other programs, do not add detergent to compartment 1.
2) Do not overuse softener; otherwise, it will damage the artificial
fibers. Refer to the instructions during use.
3. Selecting wash program
To get the best washing effect, an appropriate wash program should be selected according
to the laundry type.
Note: The above operations refer to conditions without power-off memory. Or the washing
machine will continue operation from where the program was broken. To clear memory,
press the Start/Pause button. Turn off the power for a few seconds and turn on again, all
the settings will be renewed.
１０
Load Reference
● Ｊｅａｎｓ
（８００ｇ）
● Overalls
(cotton appr 950g)
● Pajamas
(appr 200g)
● Blended fabric
clothes
(appr 800g)
● Shirts
(appr 300g)
● T-shirt
●
(cotton
Underwear
appr 300g)
(blended fabrics appr 70g)
● Socks (blended
fabrics appr 50g)
● Jackets (cotton
appr 800g)
● Single bed sheets
(cotton appr 800g)
● Woolen
blankets
(appr 3000g)
Functions
H: Wash programming knob and start button
By turning the knob clockwise or counterclockwise, the required program can be selected;
press the start button to start a program; press it again to pause
I: Speed button
Press this button to set a required spinning speed, which covers 0 rpm to 1200 rpm.
(0-1200rpm for HU-HK1207TVE/ME)
J : Temperature button
Press this button to set a required temperature. The selectable temperature range is
0-90℃. (Some programs have temperature limits. Refer to the programming guide)
K: Display
Remaining time, set temperature, spinning speed, other function information, and error messages
are displayed. Refer to the Display Description
Ｌ：Detergent distribution drawer
There are instructions on the handle of the distribution drawer. Swing
out the drawer, three compartments can be seen.
Compartment 1: Pre-washing detergent. If pre-wash is not selected, do
not add detergent.
Compartment 2: Detergent for all washing programs. Detergent must be
added where pre-wash is selected or not.
Compartment 3: Softening agent, conditioning agent, perfume, etc
B+C: combination for keyboard lock
After a program has started, press the delay button and the Prewash button at the same
time for 3 seconds, the keyboard will be locked and "SAFE ON" will appear on the screen.
Press the two buttons again for 3 seconds, the keyboard will be unlocked and "SAFE OFF"
will be displayed. This function is used to protect the washing machine from being disturbed
during operation, such as accidental press of buttons or turning of knobs by children, as this
may affect or suspend the operation of a program. Note: If this function is activated during
a washing cycle, be sure to inactivate it at the end of the cycle when the "End" sign is
displayed.
Caution: If the keyboard lock is not activated, press the Start/Pause button and then cut off
the power, the suspended program will be cancelled after power is resumed. Now turn the
program knob to reselect.
１
２
３
７