Hints For Saving Energy; Operational Functions - Hyundai HK1207TVE Operation Manual

Operational Functions

HU-HK1207TVE
+
A
A
Ｌ
B:Delay button
Press the Delay button before the program is started if necessary. Press the Delay button
once and, the delay time will increase by one hour (the regulating range is from the current
setting to 24 hours). After the delay time is changed, press the Start button to activate the
delay function.
Note: The delay time must be longer than the program time; otherwise, the washing machine
will start the wash program directly.
C:Prewash button
Press this button and the washing machine will automatically start a prewash cycle during
execution of a washing program.
D: Extra rinsing button
Press this button and the washing machine will run an additional rinsing cycle to further clean
your clothes.
E: Super wash button
Press this button,the display will turn on . The "
The super wash sign will turn off when the super wash program has finished.
F: button
Press this button, 3 load levels : "一一一一" (0-2kg), "二二二二" (2-4kg) and "三三三三"
(4-7kg) will appear on the screen for manual selection before water is filled. After the load is
set, the water content will be automatically adjusted.
G: Power button
Press this button to switch on the washing machine; press it again to switch the machine off.
To cancel a wash program during a wash cycle,please switch the machine off.
６
Ｋ
Temp. Speed
Coloured Synthetic
Normal Delicate
Easy Time Pre- Extra Super Intensive
Wool
lroning Delay wash Rinse Wash Load ON/OFF
Start
Rinse
Quick
Spin
" and " " will display .

Hints for Saving Energy

4. Setting wash temperature
o
Press the temperature button until "_ _ C" is displayed, select an appropriate temperature as required
(refer to the "Guide to Operational Program Selection").
5. Function buttons
Select functions as required (refer to the "Operational Functions" section).
6. Washing
Press the Start / Pause button, the indicator at the upper left corner of the button will blink
and the washing machine starts operation.
7. Finish
The washing machine will stop operation automatically when a wash cycle ends. The "End" sign will
appear. Open the door and take out the laundry. Then turn off the tap and unplug the power cable.
●
Hints for saving energy
During operation
1. Collect clothes for one full wash load.
2. Do not overload the washing machine.
3. Pre-wash heavily soiled clothes.
4. Reduce the amount of detergent or choose standard or delicate wash
programs for slightly soiled clothes.
5. Choose a proper washing temperature. Only exceed 60
soiled clothes.
6. Do not use more detergent than required.
7. Softening agent makes clothes feel softer and easier to iron.
℃ for heavily
１１