Sweep End Position - FeelTech FY2300H Series User Manual

FeelTech

Sweep End Position

When Sweep function is enabled. Sweep end position need to be set
according to sweep objects.
 Frequency Sweep: Press END button to highlight end frequency parameter.
Press the Arrow buttons and rotate the ADJ Knob to set the specified value.
For example:
END：00'020.000'000'000kHz
 Amplitude Sweep: Press END button to highlight end amplitude parameter.
Press the Arrow buttons and rotate the ADJ Knob to set the specified value.
For example:
END：20.00V
 Offset Sweep: Press END button to highlight end offset parameter. Press
the Arrow buttons and rotate the ADJ Knob to set the specified value. For
example:
END：10.00V
 Duty Cycle Sweep: Press END button to highlight end duty cycle parameter.
Press the Arrow buttons and rotate the ADJ Knob to set the specified value.
For example:
END：80.0%
30 FY2300H Series User's Manual