FeelTech FY2300H Series User Manual page 15

4 Waveform
Display diagram of current waveform（Including Arbitrary）。
5 Manu Bar
Display current operable options 。
6 Frequency
Display frequency value of current channel. Press FREQ
button to highlight it and use ADJ Knob and Arrows to change
the value.
7 Amplitude
Display amplitude value of current channel. Press AMPL
button to highlight it and use ADJ Knob and Arrows to change
the value.
8 Offset
Display DC Offset value of current channel. Press OFFS
button to highlight it and use ADJ Knob and Arrows to change
the value.
9 Duty Cycle
Display Duty Cycle value of current channel. Press DUTY
button to highlight it and use ADJ Knob and Arrows to change
the value.
10 Phase
Display Phase value of current channel. Press
to enter Single Channel Extension and press PHAS to
highlight it and use ADJ Knob and Arrows to change the
value.
11 Parameters of the channel unselected.
Display parameters of the channel unselected including
frequency, amplitude, offset, phase, duty cycle and output
status. These Parameters cannot be changed directly in this
interface. If you need to change them, Please switch the
channel to be selected.
FY2300H Series User's Manual
FeelTech
button
▼
11