FeelTech FY2300H Series User Manual page 10

FeelTech
2
LCD
Manu
3
Buttons
4
ADJ Knob
5
Arrows
Output
6
Channels
6
2.4 inch TFT（320×240 ）color LCD. Operation instruction please
check chapter "User Interface".
F1~F5 buttons are matched with Manu displayed on the LCD.
Press corresponding button to activate submenu represented.
— Rotate the ADJ Knob to increase or reduce the current value
indicated by the cursor.
— Frequency unit can be changed by Press ADJ Knob under
Frequency value setting status.
— Press ADJ Knob to Start/Stop sweep under Sweep interface.
Press Arrow buttons to select figure which you want to edit
when setting values of each parameter.
Control CH1 output. Press it to switch to CH1 parameter
setting interface.
— Press it to turn on CH1 output with current
configuration. The indicator will illuminate.
— Press it again to turn off CH1 output and the indicator
will extinguish.
Control CH2 output. Press it to switch to CH2 parameter
setting interface.
— Press it to turn on CH2 output with current
configuration. The indicator will illuminate.
— Press it again to turn off CH2 output and the indicator
will extinguish.
FY2300H Series User's Manual