Table of Contents
Advertisement
DVD System Setup
DVD System Setup
SETUP
PLAY/ENTER
SETUP
PLAY/ENTER
General Setup Process
When you press SETUP button
sucessively on the remote control,
the setup menu will be displayed.
It include General Setting and
Preference page menu.
1. Within the setup menu, you can
use
buttons on the remote
control to move the cursor, and
press the ENTER/PLAY button to
make your selection.
2.Press successively the SETUP
button to exit setup menu.
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
The following information applies only
when the DVD output is connected to an
external TV.
4 3/PS (PS = Pan and Scan)
You may select if you have a normal aspect
ratio (4:3) TV, although the 4:3/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4 3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV . Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16 9
You may select this if you have a widescreen (16:9) TV . Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
..General Setup Page..
.
4 3:Ps
TV Display
LB
.
Angle Mark
On
4 3:Lb
OSD Lang
ENG
16 9
Spdif Output
Caption
On
Screen Saver Off
..Preference Page..
PAL
TV Type Auto
AUTO
Parental
NTSC
Password
Default
..General Setup Page..
4 3:Ps
TV Display
LB
4 3:Lb
Angle Mark
On
16 9
OSD Lang
ENG
Spdif Output
Caption
On
Screen Saver Off
HDCD
Off
.
.
Advertisement
Table of Contents
