Dvd System Setup - Haier TDC2014S User Manual

DVD System Setup

DVD System Setup
SETUP SETUP
PLAY/ENTER PLAY/ENTER PLAY/ENTER PLAY/ENTER
SETUP SETUP
PLAY/ENTER PLAY/ENTER PLAY/ENTER PLAY/ENTER
General Setup Process
1.Press the SETUP button, the
General Setup Page,Preference
Page and Password Setup Page
will be displayed in turn.
2.Press CH+/- b or
item,then press
submenu.
or
3.Press CH+/- bu to setup,then
press PLAY/ENTER to confirm.
4.Press button to exit the menu.
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal
TV, select 4:3/LB.
The following information applies only
when the DVD output is connected to
an external TV.
4:3/PS (PS = Pan and Scan)
You may select if you have a normal aspect
ratio (4:3) TV, although the 4:3/LB (letter box)
is a more common choice. In PS mode,
widescreen (16:9) material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded.
4:3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
(16:9) material will be shown in pure unaltered form, allowing the entire picture
area of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16:9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
to select,the
to enter the
..General Setup Page..
.
TV Display LB 4:3:PS
.
Angle Mark On 4:3:LB
OSD Lang EN
Wide
..Preference Page..
SPDIF Output
Captions On
PBC On On
Screen Saver Off
Off
Parental
Last Memory Off
Default
..Password Setup Page..
Password Mode On On
Password Off Off
..General Setup Page..
.
4:3:PS
TV Display LB
.
4:3:LB
Angle Mark On
16:9
OSD Lang EN
Captions On
Screen Saver Off
Last Memory Off