Program Skip - Haier TX-DM1420 Owner's Manual

Searching channels
Continued

Program skip

P+
V- V+
MENU
P-
P+
V- V+
MENU
P-
P+
V- V+
MENU
P-
Program skip
Channels can be set so that they are skipped during
program selection.
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose the desired
channel (e.g. channel 1).
Press the MENU button. The MAIN MENU will appear
2
with the PIC (picture) icon flashing. Press the MENU
button a further 3 times until the TUN (tuning) icon is
flashing.Press P- to enter the TUNING menu.
3 Press the P+/- buttons to
select "SKIP".
4 Press the V-/+ buttons to
turn the SKIP function "ON".
5 Press the EXIT button to close
the menu. When you use the P /
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
If you want to recover the skipped channel
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat steps 1-3 above.
3 Press the VOL-/+ buttons to turn the SKIP function "OFF".
1
AUTO
BG
SKIP
PROG NO
ORGANISE
SEARCH
FINE TUNE
+ -