Advertisement
If there is no rinse aid warning light in the co ntrol panel, you can judge the amount of rinse aid by the following means.
The b lack dot on the rinse aid dispenser indicates th e amount of rinse aid in the dispenser. As the rinse aid d iminishes,
the size of the bla ck d ot decreases. You should never le t the rinse aid get below 1 / 4 full.
How To Use The All in1 Program
Your dishwasher has a "Allin1 program " which needs no salt and rinse aid but a "All in1 tablet"
.
Only the All in1 program can be used with All in1 tablets. If you use All in1 tablets in other programs,
The appli ance will not achieve a good performance.
1. The figure below shows how to hang the Allin1 tablet container on the upper basket.
2. Rotate the upper sprayer and change the location of the container to ensure the upper sprayer is not
obstructed by the All in 1 tablet container. Refer to the figure below for reference.
3. Put the All in1 tablet into the container ,then start the All in1 program.
Indicator
As the rinse aid diminis hes, the size of the b lack dot on the rinse
aid level indica tor chan ges, as illustrate d below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should re fill to eliminate spotting
Empty
6
.
Advertisement
