Auxiliary Function Selection; Starting The Programme - Beko WMB 71032 B Manual

Auxiliary function selection

Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select
or cancel auxiliary functions that are suitable to
the running programme without pressing the Start
/ Pause button when the machine is operating.
For this, the machine must be in a step before the
auxiliary function you are going to select or cancel.
If the auxiliary function cannot be selected or
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
Some functions cannot be selected together. If a
C
second auxiliary function conflicting with the first
one is selected before starting the machine, the
function selected first will be canceled and the
second auxiliary function selection will remain
active. For example, if you want to select Quick
Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will
remain active.
An auxiliary function that is not compatible
C
with the programme cannot be selected. (See
"Programme and consumption table")
Auxiliary Function buttons may vary according to
C
the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
Prewash without detergent is recommended for
C
tulle and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and
also the number of rinsing steps for lightly soiled
laundry.
When you select this function, load your
C
machine with half of the maximum laundry
specified in the programme table.
• Rinse Plus
This function enables the machine to make another
rinsing in addition to the one already made after the
main wash. Thus, the risk for sensitive skins (babies,
allergic skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be reduced.
• Anti-Creasing
This function creases the clothes lesser when they
are being washed. Drum movement is reduced and
spinning speed is limited to prevent creasing. In
addition, washing is done with a higher water level.
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in
the machine. Press Start / Pause button after this
process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry
is spun and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better removal
of stains ingrained into the clothes by holding
them in the detergent water prior to startup of the
programme.
• Pet hair removal
This function helps to remove pet hair that remain on
your garments more effectively.
When you select this function, Prewash and Extra
Rinse steps are added to the normal programme.
Thus, washing is performed with more water (30%)
and the pet hair is removed more effectively.
Never wash your pets in the washing machine.
A
Delayed Start
With the Delayed Start function the startup of the
programme may be delayed up to 19 hours. Delayed
start time can be increased by increments of 1 hour.
Do not use liquid detergents when you set
C
Delayed Start! There is the risk of staining of the
clothes.
Open the loading door, place the laundry and put
detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the auxiliary
functions. Set the desired time by pressing the
Delayed Start button. Press Start / Pause button.
The delayed start time you have set is displayed.
Delayed start countdown starts. "_" symbol next to
the delayed start time moves up and down on the
display.
Additional laundry may be loaded during the
C
delayed start period.
At the end of the countdown, duration of the
selected programme will be displayed. "_" symbol will
disappear and the selected programme will start.
Changing the Delayed Start period
If you want to change the time during countdown:
Press Delayed Start button. Time will increase by 1
hour each time you press the button. If you want to
decrease the delayed start time, press Delayed Start
button repeatedly until the desired delayed start time
appears on the display.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown
and start the programme immediately:
Set the Delayed Start period to zero or turn the
Programme Selection knob to any programme.
Thus, Delayed Start function will be canceled. The
End/Cancel light flashes continuously. Then, select
the programme you want to run again. Press Start /
Pause button to start the programme.

Starting the programme

Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the
programme will turn on.
If no programme is started or no key is pressed
C
within 1 minute during programme selection
process, the machine will switch to Pause mode
and the illumination level of the temperature,
speed and loading door indicator lights will
decrease. Other indicator lights and indicators
11
EN