Setting The Parking Sensor Interrupt On/Off; Camera Setup; Setting The Reverse Camera (Camera 1); Reverse Camera Signal Input Setting - Alpine HALO 9 Owner's Manual

∗ If you set the air conditioner, etc., while the Climate screen
is displayed, the screen will continuously be displayed.
Setting the Parking Sensor Interrupt
On/Off
Set to [On] to display the Parking Assist screen if a vehicle
detects an obstacle.
Setting item:
Parking sensor interrupt
Touch [ ] (Off) or [
sensor interrupt".

Camera Setup

[Camera] is selected on the Function Setup Menu screen.
Setting the Reverse Camera
(Camera 1)
Set to [On] when the optional reverse camera is connected.
Setting item:
Reverse Camera (Camera 1)
Touch [ ] (Off) or [
Camera (Camera 1)".
• "Reverse Camera (Camera 1)" is not available when the
Camera Setup screen is displayed using [Setup] of the
Camera screen.

Reverse Camera Signal Input Setting

When "Reverse Camera (Camera 1)" setting is [On], the
video input signal type can be chosen.
Setting item:
Reverse Camera Signal
Setting contents:
NTSC (Initial setting) / PAL
] (On) of "Parking
] (On) of "Reverse

Camera 2 Setup

Set how the second camera is used.
Setting item:
Camera 2 Setup
Setting contents:
Off (Initial setting) / Front / Side / Other
• "Camera 2 Setup" is not available when the Camera Setup
screen is displayed using [Setup] of the Camera screen.

Camera 2 Signal Input Setting

When "Camera 2 Setup" setting is not [Off], the video input
signal type can be chosen.
Setting item:
Camera 2 Signal
Setting contents:
NTSC (Initial setting) / PAL

Camera Guide Setup

You can adjust the camera guide position.
Setting item:
Camera Guide Setup
1
Touch [Camera Guide Setup] on the Camera
Setup menu screen.
The camera guide adjustment screen is displayed.
2
Touch [Camera], and then touch a camera,
[Rear], [Front] or [Side], to adjust.
• The guide line of the Other Camera cannot be adjusted.
■
Rear Camera screen example
■
Front Camera screen example
23
-EN