Function - Haier HLC24XSL2 Owner's Manual

Operation
/ button to go up and down to select the
desired option.
C
Press / ENTER button to confirm and
/ button increase and decrease the level to
adjust the selected option to your preference.
D
Repeat step 2 and step 3 until desired audio quality
has been achieved.

Function

Tuner Mode :Press
Antenna or Cable.
Channel Scan : Press
scan, press EXIT to cancel.
Video
Status: Scanning...
Analog Channels: 4
Audio Digital Channels: 3
Channel
Function
Lock
Channel Scan
All channels now available will be automatically
preset in order .After the search has finished, the
first program number will display on the screen. This
search automatically adds only the active channels in
your area to the TV's memory. It deletes any channels
on which there is no broadcast or a poor signal. The
channels found are automatically saved.
Channel Skip :Press
the submenu, then press
the channel number (eg.2) and press ENTER to
confirm, a mark will be display in the pane as
follows and this channel will be skipped next
time you press
/
digits button to select the channel
resume the channel, press ENTER button again.
EN-13 Haier LED HDTV/DVD
/ button to select
ENTER
/ button to start to
ENTER
Antenna
40%
EXIT Cancel
/ button to enter
ENTER
select
/ button to
button but you can press
. If you want to
Video
2 Analog
3 Analog
Audio
4 Analog
5 Analog
Channel
5-1 Digital
6 Analog
7 Analog
Function
8 Analog
Lock
9 Analog
10 Analog
Channel Skip
Channel Labels : Allows you to name the channel
that is selected. Press
the submenu.
Video
Channel Index
Channel Label
Audio
Channel
Function
Lock
Channel Label Set
Then press
/ button to
and
/ button to select the position of the item that
you want to change, afterward press INPUT to input the
numbers and symbols and ENTER button to confirm.
Time Shifting Mode :
Mode on or off.
A
Set the Time Shifting On, then insert the USB drive in
the USB input.
B
Press PLAY/PAUSE to play or pause the program. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played
by pressing the STOP button.
-00:00:01 7:00
-00:00:01 7:00
1
x
1.Time shift time. The time delay to the current program
time.
2.Playback status: It shows the playback status (Play,
Select EXIT
ENTER Set / Back
/ button to enter
ENTER
1
Select
/ EXIT Back
select Channel Index
To turn the Time Shifting
7:30
7:30