Table of Contents
Advertisement
(such as a vacation), it's a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Specification
Product Specification
Resolution(Dot)
Power requirement
Color system
External Antenna
Impedance
Color
Operating
Temperature Range
Operating Humidity
Range
Maximum Elevation
Accessories
* The specifications shown above may be changed
without prior notice for quality improvement.
Troubleshooting
Troubleshooting
For the sake of time and cost, it is strongly
recommended that you check out the problem by
yourself according to the instructions listed hereunder
before contacting the after-sales service for technical
assistance.
19''
22''24''
1366 768
1920 x 1080
120V~ , 60Hz
NTSC, ATSC, Clear QAM
75 ohm
16,770,000 (256 steps of
each R, G and B)
32~104 0F (0~40 0C)
Less than 80%
6561 feet (2000m)
Remote control
Batteries
User manual
Quick start guide
DC power adapter
Specification/Troubleshooting
Verify if the television is properly
plugged.
No picture,
Verify if the television is properly
no sound
supplied power.
Verify if electricity is available.
Verify if correct signals are input.
Press INPUT button to change
signal input to TV input.
Blank screen
Restart the television of power
supply is interrupted.
Press Mute button and verify if
Mute mode is set.
Switch to other channel and verify
No sound
if the same problem happens.
Press VOL+ button to see if the
problem can be solved.
Verify if sound system is correct.
Poor sound
Refer to Page 18 for adjustments.
Verify if correct channel is selected.
No picture
Adjust the antenna.
in some
Make adjustments by Fine Tune
channel
and Manual Scan.
Verify if the same problem exists in
No color
for some
other channels.
Check out of picture and sound
channel
systems.
program
Refer to relative instructions in the
(black and
Manual for color adjust.
white)
Verify if the antenna is correctly
connected.
Spots with
Verify if the antenna is in good
some or all
pictures
condition.
Make fine adjustment of channel.
Horizontal/
Check for local interference such
vertical bars
as an electrical appliance or power
or picture
tool.
shaking
Disconnect the television from
power supply and, 10 seconds
later, connect the television to
Television
the power supply. If the problem
out of control
still exists, contact authorized
after-sales service for technical
assistance.
Haier LED HDTV/DVD
EN-26
Advertisement
Table of Contents
