Table of Contents
Advertisement
Video
Balance
Bass
Audio
Treble
SRS TS XT
Channel
Equalizer
Speaker
Function
SPDIF Type
AVL
Lock
Audio Only
Audio
B
Press
/ ENTER button to enter the menu and
/
button to go up and down to select the
desired option.
C
Press
/ ENTER button to confirm and
/
button increase and decrease the level to
adjust the selected option to your preference.
D
Repeat step 2 and step 3 until desired audio quality
has been achieved.
Function
Balance: Press
/
button and
confirm, then press
output between left and right speakers.
Bass :Press
/
button and
to confirm, then press
decrease the level of the lower-pitched sounds.
Treble :Press
/
button and
to confirm, then press
decrease the level of the higher-pitched sounds.
SRS TS XT :: To turn the simulated surround sound on
or off.
Equalizer : To adjust the equalizer Off /Rock /Pop /Live
/Dance/ Techno /Classic and Soft.
Speaker : To adjust
the speaker on or off.
SPDIF Type : To
adjust the SPDIF output: Off /Dolby
Digital and PCM.
AVL : This will reduces the differences in volume level
among broadcasters.
Audio Only : Press
/ENTER button to confirm, the
following display will appear on the screen:
Press
to select OK, then press OK to confirm. The TV
screen will be black and no picture , but the sound is
still normal.
0
50
50
On
Off
Off
Off
Off
ENTER
Adjust
/
Select
EXIT
Back
/
to
ENTER
/
to adjust the audio
/
button
ENTER
/
to increase or
/
ENTER
/
to increase or
Press POWER button to exit Audio Only mode.
OK
You can press POWER button to reveal the picture on
the screen.
SAP Broadcasts Setup
This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound
signal as well as the original one.
When having selected SAP button on the remote
control, this TV can only receive the signal when the TV
station transmits the proper signals.
Mono sound is automatically received if the broadcast
is only in Mono; even though Stereo or SAP has been
selected.
Select Mono if you want to listen to mono sound during
stereo/SAP broadcasting.
Stereo or SAP can be received in a Analog channel.
A
Use the SAP button to select your desired MTS
mode in a analog signal. Each time you press the
SAP button, Mono, Stereoor SAP appear. If other
languages are available on the digital signal, select
them with the SAP button.
B
Press EXIT button to save and return to TV viewing.
Channel Menu Options
Channel menu will appear in main menu only in TV
mode.
A
Press
MENU button and
following menu appears on the screen.
Video
Tuner Mode
Channel Scan
Audio
Channel Skip
Channel Labels
Channel
Time Shifting Mode
Function
Lock
Channel
B
Press
/ ENTER button to enter the menu and
Haier LED HDTV/DVD
Operation
Cancel
/
button until the
Antenna
On
Select
EXIT
Back
/
EN-12
Advertisement
Table of Contents
