Table of Contents
Advertisement
Operation
Video Menu Options
Picture quality can be adjusted for any input
„
separately .
The picture quality on the screen can be adjusted as
follows:
A
MENU button and then use CH+/- button until
Press
the Video menu appears on the screen.
B
VOL+/ ENTER button to enter the menu
Press
function and CH+/- button to scroll up and down to
select the desired function.
C
VOL+/ ENTER button to confirm and VOL+/-
Press
button increase and decrease the level to adjust the
selected option to your preference.
D
Repeat step 2 and step 3 until desired picture quality
has been achieved.
Mode
Video
Brightness
Contrast
Audio
Color
Tint
Channel
Sharpness
Color Temperature
Function
Advanced Video
Lock
Video
Note
The options may be different because of the inputs.
R
Symbols on top of the menu in this manual may
R
differ from the actual set display.
The picture options can be changed only in Custom
R
mode, the other modes are fixed.
Function
Mode
: Select the type of picture which best
Y
corresponds to your viewing requirements by
selecting picture mode in Video menu. You may
select the picture mode directly by pressing the
PICTURE button on the remote control.
Brightness:
Press
Y
ENTER button to confirm, then press
button to adjust the brightness of the picture.
EN-11
Haier LCD HDTV
Custom
CH+/-
ENTER
Adjust
Select
VOL+/-
button and
CH+/-
VOL+
VOL+/-
Contrast:
Y
button to confirm, then press
adjust the contrast of the picture.
Color:
Y
button to confirm, then press
adjust the color saturation.
Tint:
Adjust the tone of the picture.
Y
Sharpness: Adjust the amount of the detail
enhancement, the image sharpness rises as the
number increases (By increasesing the level, it will
show cleaner and clearer images and by descreasing
the level, it will make the picture smoother).
Color temperature:
Y
Warm(red) and Cool(blue) colors to suipersonal
preferences. Select Cool to give the white colors a
biue tint, Standard to give the white colors a neutral
tint, Warm to give the white colors a red tint. User to
allow you change the color manually.
Advanced Video:
Y
level:
•
DNR:
the appearance of digitizing errror caused by the
50
compressin: Medium/Strong/Auto/off/Low.
50
50
MPEG NR:
•
0
Medium, Strong, Off
50
Adaptive Luma Control:
•
luminance of the
•
Flesh Tone:
Low or Medium.
EXIT
Back
•
Blue Stretch:
•
Game Mode:
Overscan:
•
menu only when the signal is EIA timing (480i /480p
/720p /1080i /1080p) in RGB color space in HDMI/DVI
input.
Audio Menu Options
Sound can be adjusted for any input as follows:
A
Press
following menu appears on the screen.
/
Audio
Press
button and
CH+/-
Press
button and
CH+/-
This will increase or decrease
To adjust the picture in advanced
Digital Noise Reduction, to adjust to reduce
To adjust the MPEG Noise Reduction:
or
Low.
To adjust changes in the
picture: Medium, Strong, Off or Low.
To adjust the flesh colors: High, Off,
To set Blue Stretch: On and Off.
To set Game Mode: On and Off.
This function is active and visible in
MENU button and then CH+/- button until the
Video
Balance
Bass
Audio
Treble
SRS TS XT
Channel
Equalizer
Speaker
Function
SPDIF Type
AVL
Lock
Audio Only
ENTER
/ ENTER
VOL+
button to
VOL+/-
/ ENTER
VOL+
button to
VOL+/-
0
50
50
On
Off
Off
Off
Off
CH+/-
Adjust
Select
EXIT
Back
VOL+/-
Advertisement
Table of Contents
