Hotel Mode - Changhong Electric LED50C2000IS Operation Manual

Menu Operation

Hotel Mode

Press the SOURCE button to display the Source Menu, then press 2 0 1 2 to enter
into the Hotel Mode to adjust the relative settings.
■ Hotel Enable: Set the Hotel Enable On/Off by
pressing the ◄/► buttons. When it is On, switch off
at the power supply and the hotel mode will be
enabled. The TV will automatically enter into hotel
mode when turned on again.
• When Hotel Enable is On, the tuning and
Programme Edit function is locked.
■ On Source: Set the default signal source by pressing
the ◄/► buttons. (The default signal source will be
displayed when the TV is turned on.)
■ On Channel: Set the default channel by pressing the
◄/► buttons. (The default channel will be displayed
when the TV is turned on.)
■ On Volume: Set the default volume by pressing the
◄/► buttons. (The default volume is the volume when
the TV is turned on. Remember the default volume should be less than the maximum
volume).
■ Max Volume: Set max volume by pressing the◄/► buttons. When the max volume is
lower than the default volume, the max volume is the priority.
■ Picture Mode: Set the default Picture Mode by
pressing the ◄/► buttons.
■ Sound Mode: Set the default Sound Mode by
pressing the ◄/► buttons.
■ Channel List Transfer: You can export all current
channel information (including channel number, channel
name, frequency, etc.) into the U disk, as the channel
information backup for this unit. The system will
automatically create a data file to store the channel
information has been exported. If you cannot restore
the initial channel information after SORT, MOVE, DEL,
SKIP, LOCK, etc. operations, you can import the
channel information from the USB.
46
UK