Changhong Electric LED50C2000IS Operation Manual page 29

Menu Operation
Wi-Fi Wizard
If you want to connect AP, AP should support DHCP.
1. Turn on your TV, press the MENU button on your remote,
use the ◄/► button to
the ENTER button.
2. Select Wi-Fi Wizard then press the ENTER button.
The Network function searches
networks.
When done, it displays a list of the available
3.
In the list of networks, press the ▲/▼ button to
select a network, and then press the ENTER button.
if the network has not a sign
connection right now,or you must enter the Password.
If the AP is set to Hidden (Invisible), you have to
select Other (Hidden WiFi AP).
On the Enter Password screen, key in your
4.
network's Password as follow as these steps:
press ENTER button to display the keyboard at the screen.
Then press
▲/▼
to cycles through lower case, upper
Select
and press ENTER to
Press ▲/▼
/
/
button to key in, then select and key in another.
To delete the last letter or number you entered, Use the direction buttons to select
and press ENTER.
To delete all passwards, press the direction buttons to selcet
5 . Press MENU button to finish enter passward, When done, press the ENTER button
on your remote.
The Network Connecting screen appears. Wait until the"Wi-Fi is Connected" screen
is displayed,then press ENTER.
Press the RED button on the remote to diconnect.
Press the GREEN button on the remote to refresh Wi-Fi
The password box supports up to 8 characters.
NOTE:
•
select Network,
for available wireless
, you will establish the
on the remote
/
/ buttons
open numbers keyboard.
buttons to select the letter or number, and press the
and then press
networks.
to select
case.
resource.
26
and press ENTER
ENTER
and press ENTER.
UK