Supported Alarms; Led Notification - Veratron LINK UP J1939 User Manual

SUPPORTED ALARMS

Alarm
Check Engine
Low Fuel Delivery Pressure
Water in Fuel
Low Oil Level
Low Oil Pressure
High Tc Boost Pressure
High Air Inlet Pressure
High Coolant Temperature
Low Coolant Level
Low Transmission Oil Level
Low Transmission Oil Pressure
Low Electrical Potential
High Exhaust Gas Temperature
High Oil Temperature
High Transmission Oil Temperature
Engine Overspeed

LED NOTIFICATION

LED behavior
OFF
ON
Slow blink (1Hz)
Fast blink (2Hz)
Very fast blink (10Hz)
SPN
-
94
97
98
100
102
106
110
111
124
127
168
173
175
177
190
Description
Device not powered.
Device configured and in operation.
Device in operation with invalid or empty configuration (factory settings).
Waiting for configuration by the user.
NMEA 2000® messages are NOT transmitted.
LinkUp doesn't receive valid data over the J1939 CAN bus
NMEA 2000® messages are being set as "invalid".
Device reconfiguration in progress after wireless download.
CONFIGURATION
B001030