Page 1
SNZB-04 User manual V 1.0 Wireless Door/Window Sensor...
Page 2
.SONOFF TECHNOLOGIES CO., LTD English The device can be operated intelligently via working with the SONOFF .ZigBee Bridge to communicate with other devices The device can work with other gateways supporting ZigBee 3.0 the final wireless protocol. Detailed information is in accordance with .product...
Page 3
.SONOFF TECHNOLOGIES CO., LTD English .3 Add sub-devices Connect the Bridge before adding the sub-device ZBB ridg Added:0 .No c h ild d e vice,please add < Access eWeLink APP, select the Bridge that you want to connect, and tap r 5so“Add”...
Page 4
Reset button Features SNZB-04 is a ZigBee low-energy wireless door/window sensor that makes you teknow the opening/closing status of door and window by separating the magn trfrom the transmitter. Connect it with the Bridge and you can create a sma .scene to trigger other devices...
Page 5
.SONOFF TECHNOLOGIES CO., LTD English SONOFF ZigBee Bridge supports connecting multiple sub-devices at the same .time ZBBridge Add Device Connecting Added:0 Keep the device close enoupg to the hub .No child device , please add < Looking for device Found devices Power the Bridge on, access the Bridge page in the eWeLink APP, and tap patient “Add”.
Page 6
.SONOFF TECHNOLOGIES CO., LTD English Installation methods .1 .Tear off the protective film of the 3M adhesive .2 Try to align the mark line on the magnet with that on the transmitter during .installation .3 .Install them in the opening and closing area separately 10mm <...
Page 7
.SONOFF TECHNOLOGIES CO., LTD English Application Doo r Windo w :Note ●.Do not install outside the door/window ● Do not install in the unstable position or in the place exposed to .rain or moisture ●.Do not install near wiring or magnetic object...
Need help?
Do you have a question about the SNZB-04 and is the answer not in the manual?
Questions and answers