Page 1
SNZB-04 User manual V 1.0 Wireless Door/Window Sensor 中文------------------1-6 English------------- 7-12 Deutsch----------- 13-18 Español------------19-24 Français----------- 25-30 Italiano------------31-36 Русский язык------37-43 Português---------44-50 FCC Warning--------- 51...
Page 2
SONOFF TECHNOLOGIES CO., LTD. The device can be operated intelligently via working with the SONOFF ZigBee Bridge to communicate with other devices. The device can work with other gateways supporting ZigBee 3.0 wireless protocol. Detailed information is in accordance with the final product.
English SONOFF TECHNOLOGIES CO., LTD. 3. Add sub-devices Connect the Bridge before adding the sub-device ZBBridge Added:0 No child device,please add. > Access eWeLink APP, select the Bridge that you want to connect, and tap “Add” to add a sub-device. Then long press reset button on the device for 5s until the LED indicator flashes three times, which...
LED indicator Reset button Features SNZB-04 is a ZigBee low-energy wireless door/window sensor that makes you know the opening/closing status of door and window by separating the magnet from the transmitter. Connect it with the Bridge and you can create a smart scene to trigger other devices.
Page 5
English SONOFF TECHNOLOGIES CO., LTD. SONOFF ZigBee Bridge supports connecting multiple sub-devices at the same time. ZBBridge Add Device Connecting Added:0 Keep the device close enough to the hub. No child device,please add. > Looking for device 3 devices Found Power the Bridge on, access the Bridge page in the eWeLink APP, and tap “Add”.
English SONOFF TECHNOLOGIES CO., LTD. Installation methods 1. Tear off the protective film of the 3M adhesive. 2. Try to align the mark line on the magnet with that on the transmitter during installation. 3. Install them in the opening and closing area separately.
Page 7
English SONOFF TECHNOLOGIES CO., LTD. Application Door Window Note: ● Do not install outside the door/window. ● Do not install in the unstable position or in the place exposed to rain or moisture. ● Do not install near wiring or magnetic object.
FCC Warning SONOFF TECHNOLOGIES CO., LTD. FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could avoid the user ’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is...
Page 9
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type SNZB-04 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://www.sonoff.tech/usermanuals TX Frequency: ZigBee:2405-2480MHz MAX PER:...
Need help?
Do you have a question about the SNZB-04 and is the answer not in the manual?
Questions and answers