Advertisement
AutoFlex Connect II display kit installation guide
This procedure explains how to install AutoFlex Connect II display kit, model
This kit is for AutoFlex Connect II controls that have six module positions.
Follow the steps in the order they are listed.
Create a new database backup
A.
Shut down AutoFlex Connect
B.
C.
A. Create a new database backup
If your AutoFlex Connect II is not functioning, skip to section
Create the backup on the
label.
Your control might look different than the pictures in the examples but the
procedure is the same.
1. At the control, press the main menu and then
.
Administration
2. On the Admin Panel, press
3. Press
and then press
Eject USB
the instructions on the screen. If a message
displays that it is safe to remove the USB
drive,
DO NOT press
4. Loosen the four screws that secure the cover
and then open the cover.
5. Remove the USB drive that
6. On the new display, remove the USB drive that
7. Plug the new USB drive into the port where you removed the old USB drive from in step 4.
8. Press
.
Okay
9. Swipe to the right or left until you see the Backup Database icon.
10. Press
Backup Database
11. Press
and then wait for the backup to complete.
Yes
12. Eject the USB drive as you did in step 3.
13. Remove the USB drive.
14. Plug the old USB drive into the port and then press
34440700
USB drive that
new
.
Diagnostics
. Follow
Yes
.
Okay
have the WARNING label.
DOES NOT
.
D.
E.
F.
have the WARNING
DOES NOT
have the WARNING label.
DOES NOT
.
Okay
.
KAFXMC2-DISPLAY
.
B
REMOVE
DO NOT
REMOVE
1 of 4
Advertisement
Table of Contents
Related Manuals for Phason AutoFlex Connect II
Summary of Contents for Phason AutoFlex Connect II
- Page 1 AutoFlex Connect II display kit installation guide This procedure explains how to install AutoFlex Connect II display kit, model KAFXMC2-DISPLAY This kit is for AutoFlex Connect II controls that have six module positions. Follow the steps in the order they are listed.
- Page 2 B. Shut down AutoFlex Connect II If you can access the menus at the control or from a web browser, start at step 1. If you cannot access the menus, start at step 3. 1. On the Diagnostics screen, swipe right or left until you see the Shut Down Display icon.
- Page 3 7. Unplug the USB drive from your computer. 8. Plug the USB drive from the new display into the computer. 9. Find the folder on the USB drive. Backups 10. Locate the backup file that you copied to your computer and then copy it to the new USB drive. Right-click the backup file and then select Copy Right-click the...
- Page 4 OFF. 3. Reinsert the tab between the battery and contact. L1 and L2 will be OFF when the tab is correctly inserted. Phason 2 Terracon Place, Winnipeg, Manitoba R2J4G7, Canada 800-590-9338 (toll free in North America) 204-233-1400 (worldwide) support@phason.ca...
Need help?
Do you have a question about the AutoFlex Connect II and is the answer not in the manual?
Questions and answers