Cisco uBR10-LCP2-MC28C Installation Manual page 13

Attach an antistatic wrist strap to your wrist and to a bare metal, unpainted surface on the chassis or
Step 1
frame.
Face the back of the Cisco uBR10012 chassis. Clear enough interface and power cables to allow
Step 2
sufficient space to work.
If installing a new cable interface line card in a blank slot, remove the blank slot cover and discard it.
Step 3
Otherwise, disconnect all coaxial cables from the cable interface line card being replaced or removed.
Step 4 Unscrew the top and bottom captive screws on the cable interface line card
Figure 5
Captive
screws
Simultaneously pivot both ejector levers away from each other to disengage the cable interface line card
Step 5
from the backplane
OL-4653-01
Locating the Captive Screws on the Cisco uBR10-LCP2-MC28C Cable Interface Line
Card
(Figure 6).
Cisco uBR10-LCP2-MC28C Cable Interface Line Card for the Cisco uBR10012 Router
Installing a Cisco uBR10-LCP2-MC28C Cable Interface Line Card
CI SC O
10 00 0 CI SC O
CI SC O
10 00 0
10 00 0 CI SC
10 0
Captive
screws
(Figure 5).
13