Instructions For The Electronic Control Panel - Haier HRF-370 User Manual

English

INSTRUCTIONS FOR THE ELECTRONIC CONTROL PANEL

HRF370 - HRF370AA - HRF370AAA - HRF370/2
HRF470 - HRF470AA - HRF470AAA - HRF470/2
1. Control panel
2. Fridge temperature setting
Press button B to set the fridge temperature. Indicator E
will start blinking, indicating the set fridge temperature.
Each time button B is pressed, the set fridge temperatu-
re will increase by 1°C, in a range between 2°C and
10°C. If no operation for 5 seconds, the temperature indi-
cator will stop blinking and the set fridge temperature
has been confirmed, the current fridge temperature will
then be displayed.
3. Freezer temperature setting
Press button C to set the freezer temperature. Indicator F
will start blinking, indicating the set freezer temperature.
Each time button C is pressed, the set freezer temperatu-
re will decrease by 1°C, in a range between -16°C and -
26°C. If no operation for 5 seconds, the temperature indi-
cator light will stop blinking and the set freezer temperatu-
re has been confirmed, the current freezer temperature will
then be displayed.
Note: To set the fridge or freezer temperature, wait until the
current temperature indicator light stops blinking.
A. Super cooling / fuzzy logic
B. Fridge temperature setting / Fridge off
C. Freezer temperature setting / Freezer off
(HRF370/2 – HRF470/2)
D. Super freezing / Stand-by
E. Fridge temperature display
F. Freezer temperature display
G. Ambient temperature display / time display
H. Ambient temperature indicator
I. Stand-by indicator
J. Refrigerator mode / energy saving indicator
K. Super cooling indicator
L. Fuzzy logic indicator
M. Alarm indicator
N. Alarm clock indicator
O. Super freezing indicator
4. Super cooling
After shopping, in order to avoid any influence to the cooled
food already stored, you are recommended to choose this
function when you put the fresh vegetable, fruit, etc, into frid-
ge compartment. The ventilator fan could help to cool your
fresh food faster. The different levels, from "01" to "04", are
linked to the quantity of the fresh food to be cooled.
Press button A to activate the super cooling function.
Indicator K will light up and indicator E will show "00" blinking
("+", "-" and "°C", are not displayed). Each time button A is
pressed, the setting increases by one level up to "04", after
which the cycle will start from "00" again ("01" means 1.5
hour of ventilation, "02" means 3 hours, "03" means 4.5
hours and "04" means 6 hours). If no operation for 5
seconds, the fridge temperature will be displayed. If level
"00" is selected, the super cooling function is deactivated
and the previous display will appear.
When the super cooling function is active, the freezer com-
partment will operate according to the selected setting.
When the super cooling function is active, the freezer tem-
perature, fuzzy logic, super freezing and clock can be set,
whereas the fridge temperature and stand-by mode cannot.
- 13 -