Table of Contents
Advertisement
Specifications* *
For further information, refer to the "Basic Information".
Power source*
:
24 V AC
1
PoE++ (IEEE802.3bt compliant)
PoE+ (IEEE802.3at compliant)
Power consumption*
:
■ When using in the operating temperature range of –50 ˚C to +60 ˚C
1
{–58 °F to +140 ºF}
24 V AC:
PoE++ 54 V DC: 940 mA / approx. 50.8 W (Class 6 device)
■ When using in the operating temperature range of –30 ˚C to +60 ˚C
{–22 °F to +140 ºF}
PoE+ 54 V DC:
Operating environment:
Ambient operating temperature:
–50 °C to +60 °C {–58 °F to +140 ºF} (24 V AC, PoE++),
–30 °C to +60 °C {–22 °F to +140 ºF} (PoE+)
(Power on range: –30 °C to +60 °C {–22 °F to +140 °F})
Ambient operating humidity:
10 % to 100 % (no condensation)
Storage environment:
Storage temperature:
–30 °C to +60 °C {–22 °F to +140 °F}
Storage humidity:
10 % to 95 % (no condensation)
EXT I/O terminals:
ALARM IN1 (Alarm input 1/ Black & white input/ Auto time adjustment input) (x1)
ALARM IN2 (Alarm input 2/ALARM OUT) (x1)
ALARM IN3 (Alarm input 3/ AUX OUT) (x1)
Audio input:
ø3.5 mm stereo mini jack
For microphone input:
Recommended applicable microphone: Plug-in power type
(Sensitivity of microphone: –51 dB to –38 dB (0 dB=1 V/Pa, 1 kHz))
Input impedance: Approx. 2 kΩ (unbalanced)
Supply voltage: 2.5 V ±0.5 V
For line input:
Input level: Approx. –10 dBV
Audio output*
:
ø3.5 mm stereo mini jack (Audio output is monaural.)
2
Output impedance: Approx. 600 Ω (unbalanced)
Output level: –20 dBV
Waterproof*
3
:
IP67/ IP66 (IEC 60529), Type 4X (UL50E), NEMA 4X compliant
Shock resistance:
IK10 (IEC 62262)
Wind resistance:
Up to 40 m/s {approx. 89 mph}
Dimensions:
Maximum diameter: ø229 mm × 278 mm (H) {ø9-1/32 inches × 10-15/16 inches (H)}
Dome radius 80 mm {3-5/32 inches}
Mass:
<WV-S65340-Z4> Approx. 4.3 kg {9.49 lbs}
<WV-S65340-Z2> Approx. 4.2 kg {9.27 lbs}
Finish:
Main body:
Outer fixing screws: Stainless steel (Corrosion-resistant treatment)
Dome cover:
Others:
Tamper-resistant enclosure*
NEMA TS2 Compliant
Maximum temperature according to NEMA TS 2 (2.2.7): 74 °C (165 °F)
*1 Refer to our technical information website <Control No.: C0106> for further information about Power source
and Power consumption information.
*2 The audio output can be switched to the monitor output. Refer to the "Operating Instructions" on our support
website for descriptions of how to switch the output.
*3 Only when installation work is properly performed according to the Installation Guide and appropriate water-
proof treatment is performed.
*4 Component that has a structure on which the screws that are accessible after installation cannot be screwed
or unscrewed using an ordinary screwdriver.
3.4 A/Approx. 53.3 W
470 mA / approx. 25.4 W (Class 4 device)
Aluminum die cast, silver / PC resin, i-PRO white
PC resin, Clear (with ClearSight coating)
4
Optional accessories
Ceiling mount bracket:
WV-QCL500
Dome cover (smoke):
WV-QDC503G
The latest information → Technical information website "Accessory Selector" <Control No.: C0501>
Standard accessories
Installation Guide (this document) ...................... 1 pc.
Installation procedure leaflet ............................... 1 pc.
*1 This label may be required for network management. Use caution not to lose this label.
Waterproof RJ45 connector cover/
cap ×1
Waterproof tape ×1
24 V AC connector kit ×1
8P alarm cable ×1
(Connector housing ×1, Contact ×3)
Other items that are needed (not included)
When installing this product, be sure to prepare the brackets in combination as shown below.
Installation method
When hanging from a high ceiling
WV-QCL501-W + WV-QSR504-W
When hanging from a low ceiling
WV-QCL500-W
When mounting on a wall
WV-QWL501-W + WV-QSR504-W
When locally procuring a mount bracket
Locally procured bracket + WV-QSR504M-W / WV-QSR504F-W
WV-QSR504M1-W / WV-QSR504F1-W
*1 Select screws according to the material of the location that the camera will be mounted to. In this case,
wood screws and nails should not be used.
*2 This value indicates the minimum pull-out strength required value per screw. For information about the mini-
mum pull-out strength, refer to our technical information website <Control No.: C0120>.
*3 The screw length is an example when installing the camera on a robust ceiling or wall with a thickness of
20 mm {25/32 inches} or more.
• RJ45 plug and Ethernet cable (category 5e or better, straight, 4 pairs (8 pins))
• As necessary, audio input cable, audio output cable, alarm I/O cables, power supply cable
• 5 mm {3/16 inches} hexagon wrench and other tools.
4
Extension Unit (Optical interface option unit): WV-X65F1
Mount bracket:
IMPORTANT SAFETY INSTRUCTIONS .............. 1 pc.
Code label*
1
....................................................... 1 pc.
Rain wash coating label ×1
Recommended
screw*
1
M10 × 16 mm
{5/8 inches} × 4 pcs.*
3
M8 × 16 mm
{5/8 inches} × 4 pcs.*
3
M10 × 16 mm
{5/8 inches} × 4 pcs.*
3
Refer to the operating instructions of each
bracket.
WV-QSR504
Minimum pull-out
strength*
2
1411 N {317.21 lbf}
1539 N {345.98 lbf}
823 N {185.02 lbf}
Advertisement
Table of Contents
