Switching On The Appliance; Setting A Programme; Setting Additional Functions; Setting Timer Programming - Siemens SX87YX03CE Information For Use

Hide thumbs Also See for SX87YX03CE:
Table of Contents

Advertisement

en operation
If the electric childproof lock is ac-
2.
tivated, press on the upper middle
section of the appliance door twice
with a short interval in between.
a The appliance door will open auto-
matically.
15.2 Switching on the appli-
ance
Press
⁠ .
The Eco 50° programme is set by
default.
The Eco 50° programme is espe-
cially environmentally friendly and
ideal for normally soiled tableware.
It is the most efficient programme
for the combination of energy/wa-
ter consumption for this type of
tableware and evidences conform-
ity with the EU Ecodesign Direct-
ive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
15.3 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
Press the right programme button.
a The programme is set and the pro-
gramme button flashes.
15.4 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
→ "Programmes", Page 19
36
Press the button for the relevant
additional function.
→ "Additional functions", Page 22
a The additional function is set and
the additional function button
flashes.
15.5 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24 hours.
Press
⁠ .
1.
Press
or
2.
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
by "Finish in" (e.g. 3h 25min) or
"Finish at" (e.g. 15:20 hours). You
can change this setting in the Ba-
sic settings.
To activate timer programming,
3.
press
⁠ .
Note: To deactivate timer program-
ming, press
4 seconds.
15.6 Starting the programme
Press
.
a The programme has ended when
the display shows "Finished".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 37
repeatedly until the
for approx.

Advertisement

Table of Contents
loading

Table of Contents