Table of Contents
Advertisement
en Basic settings
16 Basic settings
You can configure the basic settings for your appliance to meet your needs.
16.1 Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Time setting
Time format
Time display
Sprache/Lan-
guage
Water hardness
Rinse aid dis-
penser
Sensor setting
ExtraDry
1
Factory setting (may vary according to model)
38
Selection
00:00 - 24:00
12 h
1
24 h
In hours
1
Time
See selection on
the appliance.
0 - 62
16 - 20 medium
0 - 6
1
5
1
Standard
Sensitive
Very sensitive
on
1
off
Description
Set the current time.
The setting depends on the time
format selected.
Set the time format.
Set the time display for the end of the
programme.
"Finish in" shows the remaining time
the programme has to run, e.g.
3h 25min.
"Finish at" shows the time when the
programme will end, e.g. 15:20 hours.
Select the menu language.
Set the water hardness.
1
→ "Overview of water hardness set-
tings", Page 27
Set or switch off the amount of rinse
aid to be dispensed.
→ "Setting the amount of rinse aid",
Page 30
Set the water sensor for identifying
soiling.
→ "Sensors", Page 12
Switch "ExtraDry" on or off for each
operation.
The temperature is increased during
the final rinse for a better drying res-
ult. This may increase the running
time slightly.
Please take care with delicate table-
ware.
Advertisement
Table of Contents
