Log Placement - Napoleon Oakville Series Owner's Manual

Hide thumbs Also See for Oakville Series:
Table of Contents

Advertisement

Available languages

Available languages

finishing
EN
3.3

log placement

WARNING
!
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
The logs are fragile and should be handled with care.
PHAZER™ log and glowing embers, exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect
"PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
that is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
effect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
colour pigments burn in during the heat-activated curing process.
more uniform as colour pigments burn in during the heat-activated curing process."
Insert only if
applicable ---->
Log Number
Log Number
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
10
Studs
(Log #3)
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
Lower Media Tray
(Logs #6, #7, and #8)
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
14
W415-4001 / B / 06.15.22
Pilot Shield Notch
If applicable, insert the following statement:
note:
note:
Log numbers are located on the bottom or back of the logs.
Log numbers are located on the bottom or back of the logs.
Part Number
Part Number
W135-0778
W135-0779
W135-0780
W135-0782
W135-0781
W135-0783
W135-0784
W135-0785
Burner Ports
A2
A1
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
Description
Description
Rear log
Right log
Left log
Left crossover log
Right crossover log
Left charcoal log
Center charcoal log
Right charcoal
Pilot Shield
Studs
(Log #2)
B1
B2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oakville dgi3neaOakville gdi3pea

Table of Contents