Finishing; Log Placement - Napoleon NEFI27H-CTC Installation And Operation Manual

5.0 finishing

WARNING
!
• Power supply service must be completed prior to finishing to avoid reconstruction.
• Heat vents and air openings cannot be covered in any circumstances.
5.1

log placement

1
Place the logs shown on the location
dimples on the burner platform.
3
PIN
Place log (#2) onto the pin. Ensure the
log is secure onto the pin, as shown.
2
Magnetic
Pads
4
#2
PIN
#1
Place log (#1) onto the pin. Ensure the
log is secure onto the pin, as shown.
#3
Place log (#3) onto the pin. Ensure the
log is secure onto the pin, as shown.
W415-1719 / C / 04.07.17
finishing
EN
PIN
13