Download Print this page

Daintree GE Forum Frame IND739 Installation Manual

Advertisement

Quick Links

BEFORE YOU BEGIN
Read these instructions completely and carefully.
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF ELECTRIC SHOCK
• Follow all NEC and local codes.
• Use only UL approved wire for input/output connections.
Minimum size 18 AWG (0.75mm²).
Save These Instructions
These instructions do not purport to cover all details or variations in components nor
to provide for every possible contingency to be met in connection with installation,
operation or maintenance. Should further information be desired or should particular
problem arise which are not covered sufficiently for the purchaser's purpose, the
matter should be referred to GE Current, a Daintree company.
Current does not claim liability for any installation not performed according to this
guide or not by a qualified electrician.
Prepare Electrical Wiring
Electrical Requirements
The LED luminaire must be connected to the mains supply according
to its ratings on the product label.
Grounding Instructions
The grounding and bonding of the overall system shall be done in
accordance to local electric code of the country where the luminaire
is installed.
For Your Safety
• Installation to be performed by factory trained or qualified personnel.
Ensure this manual is provided to the installers and users.
• Use this product only in the manner intended by the manufacturer.
If there are any questions or concerns, contact the manufacturer.
Frame
WARNING/AVERTISSEMENT
WARNING/AVERTISSEMENT
RISQUES DE DÉCHARGES ÉLECTRIQUES
RISQUES D' INCENDIE
• Coupez l'alimentation avant d'inspecter, installer ou déplacer le
luminaire.
• Assurez-vous de correctement mettre á la terre le boítier
d'alimentation électrique.
• Respectez tous les codes NEC et codes locaux.
• N'utilisez que des fils approuvés par UL pour les entrées/sorties
de connexion. Taille minimum 18 AWG (0.75mm²).
Included Parts & Hardware
Housing(s) -
Suspended, Surface, Stem,
Standoff
Geartray(s) -
Suspended, Surface, Stem,
Standoff
Cable Assembly -
Suspended
Stem Assembly -
Stem
Installation Guide
IND739
Lens(es) -
Suspended, Surface, Stem,
Standoff
Driver Box -
Suspended, Surface, Stem,
Standoff
Standoff

Advertisement

loading

Summary of Contents for Daintree GE Forum Frame IND739

  • Page 1 Should further information be desired or should particular problem arise which are not covered sufficiently for the purchaser’s purpose, the matter should be referred to GE Current, a Daintree company. Current does not claim liability for any installation not performed according to this guide or not by a qualified electrician.
  • Page 2 Forum | Frame Series | Surface Mounting Installation Guide Installation COMPONENTS FOR SURFACE MOUNTING The Frame series surface mounting system consists of four main components: the housing (A), the geartray (B), the lens (C), the remote drive box (D). These items come shipped with and attached to the fixture to help ensure proper counts and clarification during assembly.
  • Page 3 Forum | Frame Series | Suspended Mounting Installation Guide Installation Mount remote driver box to structure within 50’ from fixture. Run With fixture now mounted, you can slowly lower it into place. Fine positive wire to first junction box and negative wire to second junction adjustments to height and leveling can be made at the box to make conductive cable connection.
  • Page 4 Forum | Frame Series | Stem Mounting Installation Guide Installation COMPONENTS FOR STEM MOUNTING The Frame series stem mounting system consists of two main components: the stem canopy assemblies (A) and the remote mount driver box (B). Both items come shipped with the fixture to help ensure proper counts and clarification during assembly.
  • Page 5 Forum | Frame Series | Standoff Mounting Installation Guide Installation COMPONENTS FOR STANDOFF MOUNTING The Frame series standoff mounting system consists of two main components: the standoff assembly (A) and the remote mount driver box (B). Both items come shipped with the fixture to help ensure proper counts and clarification during assembly.
  • Page 6 Forum | Frame Series | Standoff Mounting Installation Guide Installation Slide standoffs onto surface side brackets and screw into place. Next slide fixture side brackets onto standoffs and screw fixture in place. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.